Skip to main content

Free on-site measuring  ·  Mon–Sat 7am–6pm

Serving Lakeland & Polk CountyLicensed & insuredFixed written prices

LakelandSod & Mulch Call or text(863) 277-6992 Free quote
Highland City sod installation: fresh Floratam strips laid in a brick pattern on a new-build lot in Highland City, FL

Nearby town · 33812, 33846

Sod Installation & Mulch in Highland City, FL

New construction is still going up in Highland City, and plenty of yards here are on the lawn the builder laid before closing. We fix the ground under it, lay sod that fits the sun you actually get, and finish the beds with mulch or pine straw.

Highland City at a glance

Governed byPolk County (unincorporated)
ZIPs33812, 33846
Good fitsFloratam in full sun, CitraBlue where trees shade
From LakelandAbout 8 miles, straight down US-98

Highland City Sod Snapshot

Highland City, by the numbers.

Population
12,355 (2020 Census)
Median age
38.5 (2020 Census)
Approximate bounds
CR-540A south, Clubhouse Rd north, Strickland Ave west, 1st St SE east
Town status
Incorporated as “Highlands City” in 1925; status lost by 1927
Fort Fraser Trail
7.75 paved miles, Polk State College to Bartow, opened December 2006
Circle B Bar Reserve
1,267 acres on the northwest shore of Lake Hancock (Polk County)
New construction
Active builder listings in the community (Homes.com, 2026)
Distance to Lakeland
About 8 mi straight-line (Census 2020 Gazetteer center points)
Service area map: rings at 5, 10, 15 miles around Lakeland with nearby Polk County towns 5 MI10 MI15 MI South Lakeland Lakeland Highlands Lake Hollingsworth Lake Morton Lake Miriam Grasslands Lake Gibson Kathleen KATHLEEN Highland City HIGHLAND CITY Mulberry MULBERRY Bartow BARTOW Auburndale AUBURNDALE Polk City POLK CITY Winter Haven WINTER HAVEN Plant City PLANT CITY LAKELAND
Highland CityLakelandNearby towns

Landmarks & streets near our work

  • US-98The road between Lakeland and Bartow and the route a loaded sod truck takes; pallets come off in your driveway, never on the highway shoulder.
  • Fort Fraser TrailThe paved trail runs beside US-98; a back fence along the corridor is a good spot for a pine straw border instead of a strip of turf that's hard to mow.
  • Circle B Bar ReservePolk County's 1,267-acre reserve on Lake Hancock, home to the Polk Nature Discovery Center since 2008, and a reference point for the north side of the community.
  • Lake HancockHead of the Peace River; any lawn running to its shore or a connected wetland falls under Polk County's 10-ft no-fertilizer buffer.
  • Highland City ElementaryThe community's own elementary school; school-zone hours shape morning delivery windows on nearby streets.
  • Polk State College, Lakeland campusThe north end of the Fort Fraser Trail, on the Lakeland side of the drive down US-98.

Highland City Sod Installation Starts Below the Grass

A builder lawn is laid on a deadline. The sod goes down after the concrete trucks, the block pallets and the landscapers have all crossed the lot, and nobody comes back to see whether it rooted. When a Highland City lawn thins out in its first year or two, the cause is usually under the sod, not in it.

UF/IFAS turf specialists rank ground prep as the biggest single reason new sod roots or fails. They also point out that the fill trucked into new subdivisions frequently tests alkaline, and that a pH that's off in either direction is one of the listed reasons a St. Augustine lawn underperforms. Iron sprays can green it up for a week, but iron is not a substitute for fixing the soil.

What we check on a builder lot before laying sod

  • Compaction. If a shovel stops two inches down, so will the roots. Packed fill gets loosened before any new sod goes on it.
  • pH and salinity. UF/IFAS recommends a soil test before planting, run through the UF/IFAS Extension office in Polk County. It settles the question before you buy grass.
  • Buried debris. Stucco chips, block fragments and wire ties end up a half inch under thin sod and show up as dead patches. They come out with the old turf.
  • Grade. Soil should fall away from the slab. Low spots by downspouts get filled during lawn grading and leveling so water stops pooling against the house.
  • Irrigation. Heads get raised to the new soil line and tested, because a zone that sprays the driveway wastes the one night a week you're allowed to run it.

If the builder's lawn is mostly dead, stripping it and starting over usually costs less than nursing it along. Our sod removal and replacement service cuts out the old turf, hauls it off and preps the bed in the same visit.

Floratam, CitraBlue or Bahia for Highland City Lawns

A brand-new lot with young trees gets a lot of sky, and that suits Floratam. UF/IFAS says it won't persist with less than six hours of direct sun a day and handles cold poorly, but on an open lot it covers fast, and UF credits its coarse, heavy root system with holding up fairly well against sting nematodes in sand.

Plan for the yard you'll have in ten years, though. If you've just planted oaks along the property line, the side yard that bakes today may get four hours of sun later. CitraBlue, a UF release sold since 2018, grows denser than Floratam, competes with weeds better and is rated more drought tolerant. Our St. Augustine sod page lines it up against ProVista, Palmetto and Seville.

For a back lot, a drainage swale or the run along a fence that nobody waters, Bahia is the low-cost, low-input choice. It roots deep, needs less fertilizer and handles dry spells better than the other Florida lawn grasses. The tradeoffs are a less even look and tall seedheads in summer. See Bahia sod for details, or our Lakeland grass comparison if you're still deciding.

Watering New Sod in Highland City During the Shortage

Highland City has no city government, so it has no city water department. Depending on the street, your water comes from a public system or your own well, and the name on your bill tells you whose inspectors enforce the rules. The rules themselves are the same across the Southwest Florida Water Management District right now.

SWFWMD's Modified Phase III order is in place until March 31, 2027. Rooted lawns get one watering day a week, picked by the last digit of the address: numbers ending in 0 or 1 water Mondays; 2 and 3, Tuesdays; 4 and 5, Wednesdays; 6 and 7, Thursdays; 8 and 9, Fridays. Sprinklers may run from 12:01 to 4 a.m. or from 8 to 11:59 p.m., and properties under an acre choose a single window.

New sod is allowed, with its own 60-day allowance. For the first 30 days you may water on any day of the week inside the allowed hours. From day 31 through day 60 it drops to three days: Tuesday, Thursday and Sunday for even addresses, Monday, Wednesday and Saturday for odd. A zone only counts if new plant material makes up half of it or more. File the dated invoice with a written copy of the watering schedule where you can find both. Inside your window, run several short cycles instead of one long soak so the seams stay damp. The hose allowance before 8 a.m. or after 6 p.m. covers shrubs and bed plants, not lawns, so call your utility before you take a hose to new sod outside the night window. Our new-sod watering walkthrough has a day-by-day plan.

Dates can shift, so check SWFWMD or your utility for the current order before you schedule an install. The normal year-round schedule returns when SWFWMD lifts the order.

Pine straw installation in a curved front bed of a new single-story home in Highland City, FL

Highland City Mulch and Pine Straw for Builder Beds

Builder landscaping often comes with a thin skim of mulch over fabric, and by the second summer you can see the fabric. UF/IFAS recommends 2 to 3 inches in beds, never more than 3, pulled about a foot back from tree trunks and a couple of inches from small shrubs.

For a cubic-yard count, take the bed's square footage, multiply by inches of depth and divide the result by 324. A 300-square-foot front bed at 3 inches takes about 2.8 yards. Pine straw takes roughly 25 to 30 bales for every 1,000 square feet of bed. We handle mulch installation and pine straw installation on the same trip as a sod job, so the line between lawn and bed gets cut once.

Highland City Sod Prices: Typical Ranges

These are typical Lakeland-area ranges, not quotes. Your fixed written price comes after we measure.

JobTypical rangeWhat moves the price
Floratam St. Augustine, installed$1.30–$2.00 per sq ftSquare footage, prep on packed fill, backyard access
CitraBlue or other shade-type St. Augustine, installed$1.60–$2.50 per sq ftCultivar availability, partial-shade layout
Bahia, installed$1.00–$1.60 per sq ftHow much of the lot is getting new grass
Old lawn removal & haul-off$0.50–$1.25 per sq ftThickness of dead turf, debris in the fill
Grading / leveling$0.40–$1.50 per sq ftHow far off the grade is, sand needed
Mulch, installed$70–$130 per cubic yardMulch type, bed edging

For scale, a 2,000-square-foot front and side yard in Floratam works out to roughly $2,600 to $4,000 installed, before any removal. That's four to five pallets, depending on whether the farm cuts 400 or 500 square feet per pallet. The full breakdown is in how much sod costs in Lakeland.

Sod Delivery from Lakeland to Highland City

Measured between the Census Bureau's center points, Highland City is about 8 miles from Lakeland, with US-98 running between them. If you'd rather lay it yourself, sod delivery drops pallets on your schedule. To the west, Lakeland Highlands sits higher on the sandy Lakeland Ridge, Bartow is a few minutes down the highway, and our sod in Lakeland work covers the city itself. When you're ready, ask for a free measure and written price.

Highland City Sod & Mulch Questions

Straight answers before you call.

Still unsure? Call (863) 277-6992 and describe the yard, or text a photo.

No. Highland City is an unincorporated community governed by Polk County, with addresses in the 33812 and 33846 ZIPs. It briefly incorporated as “Highlands City” in 1925 and lost that status by 1927.

Yes. SWFWMD allows lawn replacement under the Modified Phase III order, with a 60-day establishment schedule: any day for the first 30 days within allowed hours, then three set days a week through day 60. The District does suggest waiting for the June rainy season when you can.

The usual causes are compacted fill, a soil pH that's off, buried construction debris, or Floratam that ended up in shade it can't handle. Testing the soil with the county Extension office and lifting a corner of the sod usually narrows it down before you spend money on new grass.

It can require approval and set standards. Under Florida Statute 373.185 it can't ban Florida-friendly landscaping. SWFWMD adds that while the shortage lasts, an association can't make owners use more water, and that includes forcing new plants for appearance's sake.

Divide your square footage by what the farm stacks on a pallet (most use 400, 450 or 500 square feet), then add a little for cuts around beds and curves. We measure on site for free and include the pallet count in the written price.

Not for at least 30 days. Polk County's ordinance rules out nitrogen and phosphorus right before sodding and through the first month, and UF/IFAS recommends a 30-to-60-day pause, as the grower fertilizes sod before it's cut.

Get a Written Sod Price for Your Highland City Yard

New sod or fresh beds in Highland City? Let’s measure it.

  • Free on-site measuring
  • Fresh pallets laid the day they arrive
  • Beds edged before mulch goes down
Call or text(863) 277-6992Mon–Sat 7am–6pm

Free sod & mulch quote

Rough square footage or bed size is plenty. A yard photo helps us price it faster.

  • No obligation
  • Licensed & insured
  • Cleanup included

Request received

Thanks. Expect a call back by the end of the next business day. Need an answer sooner? Call or text (863) 277-6992.